Though it may sound like a trivial plan to replace your kitchen sink, it is very feasible if you are capable of doing it by yourself and it can introduce a great change to the usability and the look of your kitchen. If you plan on doing a general renovation or stainless steel sink replacement of a kitchen sink or you have a worn-out sink So, this is the article to enlighten you on how to go about replacing your stainless steel kitchen sink. Let’s dive in!
Why you should replace your kitchen sink?
Now that we’ve gotten that out of the way may as well look into instances in which you might need a new kitchen sink. A new stainless steel sink can: A new stainless steel sink can:
Improve Aesthetics:Arranging a new kitchen sink will help provide your kitchen with a new look and feel, new and shiny.
Increase Functionality: Today’s sinks are usually better than those produced a few years ago in terms of the depth of the basins and material used.
Resolve Issues:You may need to replace your old sink if your sink is leaking or rusting or if it has visible signs of damage that need fixing as it can cause more plumbing issues.
Step 1: Prepare for the Replacement
Step 1: To prepare for the Replacement Hazard, general information gathered would be further broken down into two types: Pre Accident Information and Post Accident Information.
Shut the Water System SupplyFirst, find the stainless steel kitchen sink shut-off valves and turn the one that supplies water to the sink side you are working on that requires fixing. Turn around the submersed valves and twist them clockwise to shut down the outlet. If there are no valves, then you have to turn off the main water supply to the kitchen.
Clear the AreaBefore starting, clear all your items on the sink and put a bucket below it to help you contain any dripping water.
Step 2: Replace the old sink should be taken out of the house as shown below.
Disconnect the PlumbingLocate and turn off the supply line for the faucet which can be done by using the pipe wrench to remove the water supply lines. Next, that means you have to relieve the P-trap which is the curved pipe with the wastewater. There will be spilling over a bit of water, so be ready for it.
Remove the Sink ClipsClips that hold the sink in place can be found underneath the sink. These are in most cases metal braces that are fixed into the countertop through screws. Facescrew them out to know them Use a screwdriver to remove them.
Cut the SealantNext, take a utility knife and cut around the sink along the silicone sealant line. This will assist in lifting a portion of the sink off the countertop.
Overflow Out the Old SinkGently raise the sink out of the countertop. It will be advisable to have an assistant at this stage, especially in case the sink is large or its weight is considerably high.
Step 3: Add the New Stainless Steel SinkClean the AreaFirst, eliminate any residues of the previous sealing cement or other materials on the countertop before it is overlaid with the new sink.
Apply Plumber’s PuttySquash a dropping of plumber’s putty and place it in the region where the sink is to be installed on top of the counter.
Set the New SinkFit the new stainless steel sink into the countertop space that was left for the sink. Apply pressure on it to stick tightly on the putty.
Attach the ClipsMount the clips to the countertop and locate the sink on the clips. Screw them in with a screwdriver
Step 4: here are some Methods of Installing Other Kinds of Faucets, the Following Steps Need to be Followed to Install the Faucet.
Attach the Faucetif you are also dismantling the sink faucet, then this is the right time to fit a new one. It has to be placed on the sink before you fasten the sink to the countertop, if sach directions are to be followed that came with the manufacture.
Reconnect the PlumbingTurn off the water supply to your sink and unscrew the water supply lines from the old faucet with an adjustable wrench. Screw the P-trap into the new sink drain.
Step 5: It is recommended to use seal and test to ensure that all the compartments of the casing are properly sealed, particularly the lower ones that are subjected to pressure.
Apply Silicone SealantApply poly sealant around the sink all around the area between the sink and the countertops. This keeps the water from dripping to the adjacent floor or even going under the sink.
Test for LeaksReturn the water supply and check to ensure it does not drip for a sink. Open all the connections present under the sink to be sure that all the points are in good order.
Tips for SuccessMeasure Twice: Make sure the sink being installed matches the countertop opening for your new sink. To ensure that you are going to buy the right size of the new sink you should first take measurements of your old sink and the new sink. Take Your Time: Hiring inexperienced personnel will result in a hasty ballot which is prone to errors. Do not rush through the procedure to avoid making mistakes in the various steps. Have a Helper: It does make the work easier when there are two persons and do things such as lifting an old sink and installing a new one.
ConclusionReplacing your stainless steel kitchen sink with a new one is one of the best DIY Projects that will upgrade your kitchen. However, if you strictly adhere to these procedures and get the right equipment, it is possible to have a neat installation job. This guide is unique and informational, to any first-timer or experienced DIYer, refurbishing your kitchen sink doesn’t have to be difficult or perplexing. Happy renovating!
